2 | Home| Curriculum vitae | Research Projects | Achievements | Patents | Publications | Students-Cultivation | Contact us | 1
8

Seventy-eight EI,SCI&ISTP Retrieval Papers(Signed the first author 39):

1. Xia Qinxiang, Zhu Ningyuan, Cheng Xiuquan, Xiao Gangfeng. The Classification and A Review of Hot Power Spinning of Difficult-to-deform Metals. International Journal of Materials and Product Technology[J], 2017, Vol.54, Nos.1/2/3, pp.212-235(SCI收录)
2.Gangfeng Xiao, Qinxiang Xia, Xiuquan Cheng, Hui Long. Investigation on dimensional accuracy and mechanical properties of cylindrical parts by flow forming. Proceedings of the 4th International Conference on new forming technology (ICNFT2015) Aug.6-9, 2015, Scotland(EI收录,EIP:20160701939498)
3. Zhang S.J., Zhou C., Xia Q.X., Chen S.M. Quantification and Characterization of Full Field Ductile Damage Evolution for Sheet Metals Using an Improved Direct Current Potential Drop Method. Experimental Mechanics. 2015, 55(3):611-621 (SCI收录,DOI 10.1007/s11340-014-9982-z).
4. Gangfeng Xiao,Qinxiang Xia,Xiuquan Cheng,Yujing Zhou. Research on the grain refinement method of cylindrical parts by power spinning. The International Journal of Advanced Manufacturing Technology. Volume 78, Issue 5 (2015), Page 971-979 (SCI收录, DOI: 10.1007/s00170-014-6686-6).
5. Qinxiang Xia, Gangfeng Xiao, Hui Long, Xiuquan Cheng, Xiangfei Sheng. A review of process advancement of novel metal spinning. International Journal of Machine Tools & Manufacture, Volume 85, October 2014, PP: 100–121 ( SCI收录, DOI: 10.1016/j.ijmachtools.2014.05.005).
6. Qinxiang Xia, Gangfeng Xiao, Hui Long, Xiuquan Cheng, Baojian Yang. A study of manufacturing tubes with nano/ultrafine grain structure by stagger spinning[J]. Materials & Design, July 2014, Volume 59, Pages 516–523 (SCI收录, DOI: 10.1016/j.matdes.2014.03.012).
7. Qinxiang Xia, Teng Xu, Guohua Hong, Weiping Ruan. Prediction of the sound pressure level of blanking noise during sheet-metal blanking using servo press with counterforce. Journal of Mechanical Science and Technology, Vols. 28 (5) May (2014), P 1673~1681 (SCI收录, DOI: 10.1007/s12206-014-0312-2).
8. Zhang S.J., Xia Q.X., Li W.F., Zhou X.H. Ductile Damage Measurement and Necking Analysis of Metal Sheets Based on Digital Image Correlation and Direct Current Potential Drop Methods. International Journal of Damage Mechanics. 2014, 23(8):1133-1149 (SCI收录, DOI: 10.1177/1056789514527978).
9.Yajing SHEN,Qinxiang Xia, Guofeng ZHONG, Feng WU. Experimental Study on Three-Dimensional Flexible Stretch Bending Formability for Complex Cross-Sectional Profiles of TWB. Advanced Materials Research. Vols. 941-944 (2014) pp 1710-1714.(EI收录,DOI: 10.4028/www.scientific.net/AMR.941-944.1710)
10. Xiuquan Cheng, Zhouyi Lai, Qinxiang Xia. Investigation on Stress and Strain Distributions of Hollow -part with Triangular Cross -section by Spinning. International Journal of Materials and Product Technology (IJMPT), Vol. 47, No. 1/2/3/4, 2013 (EI光盘版收录,EIP :20140817352560; SCI, WOS: 000331087900013).
11.Qinxiang Xia, Ji Liang-bo, Li You-xiang, LIU Xiu-juan, Li Zhi-wei, Huang Cheng-long, Huang yong.Structure Design and Simulation of Lithium-ion Battery Casing Machine. Applied Mechanics and Materials. Vols. 496-500 (2014) pp 683-687.
12.Qinxiang Xia, Kaien Liang, Youxiang Li, Xiujuan Liu. Design of Control System for Lithium-ion Battery Automatic Casing Machine Based on PLC. 2013 International Conference on Mechatronics and Semiconductor Materials (ICMSCM 2013), Sep. 28-29, 2013, Xi'an, China. Advanced Materials Research. 2014, Vols. 846-847, p 121-125. (DOI: 10.4028/www.scientific.net/AMR.846-847.121)
13.Qinxiang Xia, Ji Liang-bo, Cao Bao-hua, Li You-xiang, Finite Element Simulation and Experimental Research in Insulation Spacer Blanking. Advanced Materials Research, Vol. 852 (2014) pp 523-528.
14.FAN Yanbo, Qinxiang Xia, LV Mingke, ZHAO Xuezhi, DU Yulian, Forecast on upsetting crack based on numerical simulation. Advanced Materials Research Vol. 852 (2014) pp 561-566.
15.Qinxiang Xia, Fan Yan-Bo, Xiang Ke, and Zhao Xue-Zhi. Effect of Relative Reduction of Billet Height on Forming Progress of Long-Axis Heavy Forgings. 2013 International Conference on Mechanical and Automation Engineering (MAEE.2013). Conference Publishing Services, July 21-23, 2013, Jiujiang, China, P41~44.( EPI:20134216862035)
16.Q. X. Xia, Z. C. Chen, X. Q. Cheng, X. F. Sheng. Calculation Method of Shot Peening Coverage Based on Area Computation for Random Finite Element Model. 2013 International Conference on Mechanical and Automation Engineering (MAEE.2013). Conference Publishing Services, July 21-23, 2013, Jiujiang, China, P22~25.(EPI:20134216862082) 
17.Qinxiang Xia, Gangfeng Xiao, Yulin Huo, Asheng Song. Research on stretching efficiency of heavy forged shaft based on orthogonal experimental design. Applied Mechanics and Materials, Vol. 364 (2013) PP 519-523. (EI光盘版收录, EPI: 20134316887550).

18.Xu Teng,Qinxiang Xia,Zhang  Saijun,Li  Zhenshi,Ruan  Weiping. Influence of slide stroke curves on deep drawing of box shaped part.Advanced Materials Research, Vols. 328-330 (2011), P695-699.

>>more

Seven EI Network Retrieval Papers (Signed the first author 4):


1.CHENG Xiuquan,FEN Wanlin,XIA Qinxiang:The study on the numerical simulation of non-axisymmetric tube neck-spinning and process parameters optimization, Journal of Plasticity Engineering, Vol.15, No.4,October. 2008:P61~66.

2.CHENG Xiuquan,CHEN Jiahua,XIA Qinxiang:Finite element numerical simulation and experimental research on the forming force of mandreless neck-spinning with single roller, Journal of Plasticity Engineering, Vol.14, No.5,October. 2007:P38~42.
3.XIA Qin-xiang,YANG Ming-hui,CHEN Jia-hua,CHENG Xiu-quan: Numerical simulation of influence of technological parameters on spin forming of proculiform inside engaged gear, Journal of Plasticity Engineering, No.4, 2006:P1~5.

4.XIA Qin-xiang, CHENG Xiu-quan, RUAN Feng, HUANG Zhen-yuan. Research on the Forming Forces During the 3D Non-axisymmetric Thin-walled Tubes Neck-spinning. International Technology and Innovation Conference 2006, ITIC2006: P1686~1692(EI CD ROM Retrieval,EIP072610669395).

5.XIA Qin-xiang,CHEN Yi-jin,CHENG Xiu-quan,QIU Hong-yang,RUAN Feng:Research on hydraulic system of spinning machine for 3D non-axisymmetrical thin-walled tubes, Journal of Plasticity Engineering, Vol.12, No.3, June 2005:P88~92.
6.XIA Qin-xiang:Research On manufacturing process of stainless steel vacuum thermos containers, Forging &Stamping Technology, No.6,1997:P21~24,p41.

7.HUANG Lv-quan,XIA Qin-xiang: Determination of loading spectrum and Stress spectrum of Stamping hammer, Journal of Northwestern Polytechnical University, Vol.8,No.2,1990:P216~24,p225.



43 International Conference Papers (Signed the first author 20):

1.Qinxiang Xia,Gangfeng Xiao,Xiuquan Cheng.Research on deformation mechanism of cylindrical parts with nano/ultrafine grained structure based on power spinning. The 22nd International Symposium on Plasticity and Its Current Applications(ISP2016), Jan.3-9, 2016, Hawaii,The United States. P181-183.(邀请报告)
2.C. XiuQuan, S. XiangFei, Qinxiang Xia, W. Jing. Effect of shot peening intensity on residual stress field of 7075 auminium alloy. Proceedings of the 12th International Conference on Shot Peening (ICSP2014), Sep.15-18, 2014, Goslar, Germany. P299-304.
3.Gangfeng Xiao, Qinxiang Xia,Xiuquan Cheng, Yujing Zhou. Metal flow model of cylindrical parts by counter-roller spinning. 11th International Conference on Technology of Plasticity (ICTP2014), Oct.19-24, 2014, Nagoya, Japan. P2397-2402.
4.Teng Xu, Qinxiang Xia,Xiaobin Long, Chuan Long. Research on Vibtation of High-Speed Precision Punch Press based on Multi-Domain Modeling and Simulation. Proceedings of the 12th International Conference on Manufacturing Research (ICMR2014), Sep. 9-11, 2014, Southampton, UK. P71-76.
5.Qinxiang Xia,Ningyuan Zhu, Lingyan Sun, Xiuquan Cheng. Research on Forming Quality of Cup-Shaped Inner Gear Spinning Based on Factorial Analysis. Proceedings of the 12th International Conference on Manufacturing Research (ICMR2014), Sep. 9-11, 2014, Southampton, UK. P151-156.
6.Gangfeng Xiao, Qinxiang Xia, Xiuquan Cheng, Yujing Zhou. Influence of spinning method on distributions of equivalent strains of cylindrical spun parts. Proceedings of the 11th International Conference on Frontiers of Design and Manufacturing May 23~25, 2014, Nanjing, China.
7.Qinxiang Xia,Ji Liang-bo, Li You-xiang, LIU Xiu-juan, Li Zhi-wei, Huang Cheng-long, Huang yong. Structure Design and Simulation of Lithium-ion Battery Casing Machine. 2013 the 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2013), December 11-13 HongKong, China: 683-687.
8.FAN Yanbo, Qinxiang Xia,LV Mingke, ZHAO Xuezhi, DU Yulian, Forecast on upsetting crack based on numerical simulation. 2014 the 3rd International Conference on Materials Science and Engineering (ICMSE 2013), Jan. 24-26, Jiujiang, China: 561-566.
9.Qinxiang Xia,Ji Liang-bo, Cao Bao-hua, Li You-xiang, Finite Element Simulation and Experimental Research in Insulation Spacer Blanking. 2014 the 3rd International Conference on Materials Science and Engineering (ICMSE 2013), Jan. 24-26, Jiujiang, China: 523-528.
10.Qinxiang Xia,Kaien Liang, Youxiang Li, Xiujuan Liu. Design of Control System for Lithium-ion Battery Automatic Casing Machine Based on PLC. 2013 International Conference on Mechatronics and Semiconductor Materials (ICMSCM 2013), Sep. 28-29, 2013, Xi'an, China:121-125.
11.Cheng Xiu-quan, Wang Jia-zi, Qinxiang Xia, Li Dong-he. Research on Forming Quality of Poly-wedge Pulley Spinning. Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), Sep. 19-20, 2013, Bedfordshire, UK. P269-274.
12.Qinxiang Xia,Zhouyi Lai, Juxin Qu, Xiu-quan Cheng. Influence of Processing Parameters on Forming Quality of Non-circular Spinning. Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), Sep. 19-20, 2013, Bedfordshire, UK. P275~280.
13.Qinxiang Xia,Ke Xiang, NingyuanZhu, Asheng Song. Secondary Development of Finite Element Simulation Program and Experimental Verification of Multi-step Continuous Forging. The 11th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2013) Shenyang, P.R. China, July 06-10, 2013: 452-457.
14.Qinxiang Xia,Xu Teng, Wei Guang-ming, Ye Fu-yuan. Numerical Simulation and Experimental Research on Multi-position Progressive Stamping Process of Automotive Structural Part. 2012 The 3rd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2012),HongKong December 11-13, 2012:1366-1371.
15.Qinxiang Xia,Xu Teng, Hong Guohua, Ruan Weiping. Prediction Model of Sound Pressure Level of Blanking Noise Under Counterforce Based on Servo Press. The 15th International Conference on Advances Materials & Processing Technologies, Wollongong, NSW, Australia, 23th – 26th September 2012.
16.Xiuquan Cheng, Zhouyi Lai,Qinxiang Xia. Investigation on Stress and Strain Distributions of Hollow -part with Triangular Cross -section by Spinning. The 15th International Conference on Advances Materials & Processing Technologies, Wollongong, NSW, Australia, 23th – 26th September 2012.
17.Yang Baojian,Qinxiang Xia, Xiao Gangfeng, Xie Hongxi. Research on Key Technologies of Mesoscopic FEA Model for Polycrystalline Metal Power Spinning. 2012 International Workshop on Mechanical and Energy Engineering (IWMEE2012), Jinan, China April. 27- 29, 2012:286-289.
18.Qinxiang Xia,Xu Teng, Li Zhenshi, Ruan Weiping. Influence of Slide Stroke Curves on Forming Quality of Box Shaped Partduring Deep Drawing. 2012 International Workshop on Mechanical and Energy Engineering (IWMEE2012), Jinan, China April. 27- 29, 2012: 1177-1181.
19.Xiangfei Sheng,Qinxiang Xia, Xiuquan Cheng, LieshuLin. Research on the distribution of residual stress field by shot peening based on random-shot model. Proceedings of the 3rd international conference on new forming technology,Aug, 26-28, 2012, Harbin, China
20.Chen Yang Chang, Jing Mei Zhai,Qinxiang Xia,Bin Cai. Application of Particle Swarm Optimization Based on Support Vector Machine in Multi-Objective Structure Optimization.International Conference on Engineering Design and Optimization,May 26~27,2012,Ningbo,China.
21.Zhouyi Lai,Qinxiang Xia,Gangfeng Xiao, Hongxi Xie. Research on Thickness Distribution of Spun Parts with Triangular Cross-section. Proceedings of the 10th International Conference on Frontiers of Design and Manufacturing, June 10~12, 2012, Chongqing, China.
22.Qinxiang Xia,Baohua Cao, Zhelin Li, Weiqi Zong, Heqing Xie. Research on the Temperature Distribution near the Surface of Long-Shaft Heavy Forging.2011 International Conference on Management Manufacturing and Materials Engineering-ICMMM.
23.Qinxiang Xia, L.Y.Sun, T,Xu, X.Q.Cheng. Parameter Optimization of Involute Inner Gear Spinning Based on Response Surface Method. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, Sep. 25-30, 2011, Aachen, Germany. P564~567.
24.X.Q.Cheng, X.Y.Wu,Qinxiang Xia. Research on Thickness Distribution of Spun Hollow Part with Four Arc-typed Cross-section. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, Sep. 25-30, 2011, Aachen, Germany. P560~563.
25.Qinxiang Xia,WANG Ying-pin, YUAN Ning, CHENG Xiu-quan. Study on Spinning of Pentagonal Cross-section Hollow-part Based on Orthogonal Experiment Design. 2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011.
26.Xu Teng,Qinxiang Xia,Zhang Saijun,Li Zhenshi,Ruan Weiping. Influence of slide stroke curves on deep drawing of box shaped part. 2011 International Conference on Mechatronics and Materials Processing, ICMMP 2011
27.Guangming Wei,Qinxiang Xia, Saijun Zhang, Zunwen Qiu, Fuyuan Ye. Layout Design for High Strength Steel Automotive Structural Parts Based on UG-PDW. 2011 Second International Conference on Mechanic Automation and Control Engineering, MACE 2011, Inner Mongolia China, 15-17, July, 2011. P5882~5885.
28.Zhouyi Lai, Qinxiang Xia,Zheng Huang, Xiuquan Cheng. Research on the roller feed track during spining of hollow part with triangle cross-section. 2011 Second International Conference on Mechanic Automation and Control Engineering, MACE 2011, Inner Mongolia China, 15-17, July, 2011. P649~652.
29.Xiuquan Cheng, Lingyan Sun,.Qinxiang Xia. Processing Parameters Optimization for Stagger Spinning of Trapezoidal Inner Gear. 2011 International Conference on Manufacturing Science and Enginerting, ICMSE 2011, Guilin China, 9-11, April, 2011:P2754~2758.
30.Guohua Hong,Qinxiang Xia, Weiping Ruan, Jianping Li. Research on amplitude variation during sheet blanking based on servo press. 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011, Volume 4, XianNing, china, 16-18, April, 2011:P3413~3416.
31.Baojian Yang,Qinxiang Xia, Weiping Ruan, Zhenshi Li. New Research and Development of CE in Metalforming Equipment Manufacturing. 2011 International Conference on Mechanical, Industrial, and Manufacturing Engineering, MIME 2011, Australia, Melbourne, 15-16,Jau,2011:P186~189.
32.Qinxiang Xia, Peng Zhang,Wu Xiaoyu, Xiuquan Cheng. Research on distributions of stress and strain during spinning of quadrilateral arc-typed cross-section hollow part. 2011 International Conference on Mechanical, Industrial, and Manufacturing Engineering, MIME 2011, Australia, Melbourne, 15-16,Jau,2011:P17~20.
33.Xiuquan Cheng,Jiazi Wang,Q.X. Xia. Analysis of the forming defects and its influencing factors of the poly-wedge pulley spinning. The Tenth Asia-Pacific Conference on Engineering Plasticity and Its Applications, AEPA2010, Wuhan, China, 15~17, Nov., 2010:P341~345.
34. Q.X.Xia, Guangming Wei, Yulin Huo, Su Huang, Ming Li. Research on stretching efficiency of heavy forged shaft based on orthogonal experimental design, The Tenth Asia-Pacific Conference on Engineering Plasticity and Its Applications, AEPA2010, Wuhan, China, 15~17, Nov., 2010:P171~175.
35.Xia Qinxiang, Lai Zhouyi, Zhan Xinxi, Cheng Xiuquan. Research on Spinning Method of Hollow Part with Triangle Arc-Type Cross Section Based on Profiling Driving. The 13th International Conference on Metal Forming, Toyohashi, Japan. Sep. 19~22, 2010:P994~997.
36.Cheng Xiu-quan, Huo Yu-lin,Qinxiang Xia, Kuang Bei-gu, Cheng Wen-xuan. Closing of Central Cavity in Shaft Heavy Forging. The 13th International Conference on Metal Forming, Toyohashi, Japan. Sep. 19~22, 2010:P330~333.
37.Li Zhe-linQ. X. XIA, Qin Xue-feng, Wang Shi-zi. Research on Laser Gravure Image Lossless Compression. International Conference on Information and Multimedia Technology,Dec. 16-18, 2009, Jeju Island, Korea, ICIMT2009: P72~76.
38.Q. X. XIA,L. Y. SUN, Y. SHANG, J. Z. WANG, B. Y.YE: Analysis of the Forming defects and Research on the Technology Method of the Trapezoidal Inner-gear Spinning. The 9th International Conference on Technology of Plasticity, Gyeongju, Korea, Sep. 7~11, 2008: P1495~1500.
39.L. Y. SUN, X. Q. CHENG,Qinxiang Xia, B. Y.YE: Influence of the Forming Methods on the Trapezoidal Inner-Gear Spinning The 9th International Conference on Technology of Plasticity, Gyeongju, Korea, Sep. 7~11, 2008: P1335~1340.
40.Qinxiang Xia,C. Xiuquan, L. Baixiang, Z. Saijun, R. Feng, ANALYSIS ON THE SPINNING FORCES FOR 3D NON-AXISYMMETRICAL THIN-WALLED OBLIQUE TUBES. Proceedings of the 8th International Conference on Technology of Plasticity, Verona, Italy, October 9~13, 2005: P577~578.
41.Qinxiang Xia,LIANG Bai-xiang, CHENG Xiu-quan, RUAN Feng: Influence of Nominal Reduction of the blank radius Per Path on the Neck Spinning of Oblique Tubes. JOURNAL OF GUANGDONG NON-FERROUS METALS No. 2-3, 2005 (Proceedings of the 8th China-Russia Symposium on New Materials and Technologies, October 2~5, 2005): P591~597.
42.Qinxiang Xia, Zhang Saijun, Ruan Feng: ANALYSIS ON THE SPINNING FORCES FOR 3D NON-SYMMETRICAL THIN-WALLED OFFSET TUBES. Proceedings of THE 6TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, June 21~23, 2004, Xi'an, China: P111~113.
43.Huang LvQuan,Qinxiang Xia.The Method of Determining on the Load and Stress Spectra of a Hammer. Proceedings of the First International Conference on Research and Design of Metal Forming Machines, Beijing,May 22 th to 26th, 1989:P383~390.
 


One hundred and Fortyfive Papers in Core Publications at Home and Abroad、Statistics Source Publications (Signed the first author 43):

1.Wang Erdong, Xu Xiao, Qinxiang Xia, Yao Xiaochun, Long Liren. Design on multi-position progressive die for stiffener of automotive beam. Forging & Stamping Technology, Vol.40, No.12, Dec. 2015, P87~91.

2.Qinxiang Xia,Zhou Likui, Chen Zhiping, Ye Fuyuan. Research on dynamic interference inspection of multi-position progressive stamping die based on motion analysis module of UG. Die and Mould Technology, No.6, Nov. 2015, P1~6.

3.Qinxiang Xia,Hu Xuantong, Chen Deng, Qu Hongbo. Current research and development tendency of fine blanking technology. Forging & Stamping Technology, Vol.40, No.7, Jul. 2015, P1~6.

4.Du Jun ,Qinxiang Xia, Zhu Ningyuan, Xie Hongxi. Experimental research on hot power spinning of stainless steel tube 304. Forging & Stamping Technology, Vol.40, No.6, Feb. 2015, P39~42.

5.LUO Du-yu ,Qinxiang Xia,Xiu-quan Cheng : Effect of Gear Parameters on the Spinning Process of   Cotyliform Thin-walled Gear. Forging & Stamping Technology, Vol.36, No.4, 2011:P73~76

6.LI Si-yi , Qinxiang Xia , Xiang-fei Sheng , You-hui Liao : Technical Study on Cold Bending Forming of Thin-walled Tube Based on Numerical Simulation . Forging & Stamping Technology, Vol.36, No.4, 2011:P163~167

7.CHANG Chen-yang ,Jing-mei Zhai ,Qinxiang Xia ,Zhen-shi Li ,Hai-tao Xu : Nmerical Smulation of Deep Drawing Forming for Cylindrical Parts with Flange Based Servo Press. Forging & Stamping Technology, Vol.36, No.4, 2011:P59~63

>>more


Twenty-nine Other publications’ Papers and conference papers (Signed the first author 16):

1.XIA Qin-xiang,SHANG Yue,HUO Yu-lin,ZHU Xiao-ke:The finite element numerical simulation on deep drawing process of breaking-hub dust-cover, Modern Mold &Die, March 2007:P82~85.

2.SHANG Yue,XIA Qin-xiang,XIE Shi-wei:Application of spinning technology on complex parts forming, Journal of Guangdong Non-Ferrous Metals, Vol.16,No.4, December 2006:P261~266.

3.XIA Qin-xiang,CHEN Jia-hua,XIE Shi-wei: Spinning Process & Equipments for Stainless Steel Products. FORGING & METALFORMING, Year 2005, Issue 10, Page 48-50

>>more


<< Back Home

 

            Address:School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou, China   
                    Zip:510640  Phone:(086)13902233118    FAX:(086)020-38743889 
                  Research Interses: Plastic forming theory, technology and equipment, CAD/CAE/ CAM, etc